5213 Merchant Thermostatic Mixing Valve

Model:5213 Merchant Thermostatic Mixing Valve
Revision:2
CI/SFB CODE:(59)
UNICLASS:Pr_65_54_95_88
OMNICLASS:23.65.55.14.24
Software:Revit 2014
Last Updated:21 May 2018
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, Pipe, Merchant, 5213, Thermostatic, Mixing, Valve
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, Pipe, Merchant, 5213, Thermostatic, Mixing, Valve
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, Pipe, Merchant, 5213, Thermostatic, Mixing, Valve
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, Pipe, Merchant, 5213, Thermostatic, Mixing, Valve
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, Pipe, Merchant, 5213, Thermostatic, Mixing, Valve

Further Information

The merchant fail safe thermostatic mixing valve has been specifically designed and manufactured to meet the requirements of the latest National Health Service model engineering specification - D08 and BS 7942 for use in care homes.

Application

Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur. The failsafe design shuts off the mixed water flow automatically in the event of disruption in the hot or cold water supply to the valve.

TMV2 and TMV3

The merchant range of failsafe thermostatic mixing valves have been designed and manufactured to meet the requirements of BS7942:2000 and the National Health Service model engineering specification D08 for use in healthcare premises, hospitals, care homes, and schools.

The elderly, young children and the disabled are at particular risk of life threatening scalds due to a potential lack of mobility, skin sensitivity or the ability to communicate with their carer.

The valve has been independently tested and approved as a type 3 valve under the TMV3 scheme.

The valve also meets the requirements of BS EN 1111: 1999 and BS EN1287: 1999 and the TMV2 Type Scheme. The valves have been independently tested and approved as a type 2 valve under the Buildcert TMV2 scheme by the WRc - NSF Limited / Buildcert Limited.

Merchant TMV2 thermostatic mixing valves are suitable for use in domestic housing and commercial buildings for single user outlets including wash basins, showers, baths and bidets but are also suitable for multiple outlet use.

This download contains

1 Pipe Accessory Family with two types;
  CA-100822 - 15mm Thermostatic Mixing Valve
  CA-100824 - 22mm Thermostatic Mixing Valve

COBie and NBSCreate Parameters

Altecnic BIM Userguide

rev2 - Hex cap and lower body adjustment, parameter update

 

Why not leave a Review

This is your chance to have your say. Have you enjoyed using this component. Let us know!

If you have any issues with this object you can let us know here and we will do our best to resolve the issue for you.

Other peoples comments