Heating and Chilled Water Vessel (Reflex)

Model:Heating and Chilled Water Vessel (Reflex)
Revision:1
CI/SFB CODE:(56)
UNICLASS:PR_60_50_20_28
OMNICLASS:23.75.70.11.14
Software:Revit 2016
Last Updated:21 May 2018
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, equipment, expansion, vessel,diaphragm,pressure,water,based,heating,solar,cooling,booster,systems,reflex,refix,potable,water,heating,chilled,closed,loop,unvented,heater,pumped,N,NG
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, equipment, expansion, vessel,diaphragm,pressure,water,based,heating,solar,cooling,booster,systems,reflex,refix,potable,water,heating,chilled,closed,loop,unvented,heater,pumped,N,NG
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, equipment, expansion, vessel,diaphragm,pressure,water,based,heating,solar,cooling,booster,systems,reflex,refix,potable,water,heating,chilled,closed,loop,unvented,heater,pumped,N,NG
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, equipment, expansion, vessel,diaphragm,pressure,water,based,heating,solar,cooling,booster,systems,reflex,refix,potable,water,heating,chilled,closed,loop,unvented,heater,pumped,N,NG
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, equipment, expansion, vessel,diaphragm,pressure,water,based,heating,solar,cooling,booster,systems,reflex,refix,potable,water,heating,chilled,closed,loop,unvented,heater,pumped,N,NG
Revit, Bim, Store, Components, MEP, Object, Altecnic, Mechanical, equipment, expansion, vessel,diaphragm,pressure,water,based,heating,solar,cooling,booster,systems,reflex,refix,potable,water,heating,chilled,closed,loop,unvented,heater,pumped,N,NG

Further Information

Application

Heating and chilled water Vessels are commonly used in closed loop systems with an Unvented Water Heater or a Pumped System. The N & NG range is fitted with a diaphragm, which cannot be replaced. These vessels are ideal for use in water systems with low pressure circuits, as suitable for brine circuits in heat pump systems.

Design

Manufactured in carbon steel with a two or three-part weld construction. Pre-pressurised air chamber with synthetic rubber compound diaphragm.  The internal surfaces of the vessel in contact with the water are coated against corrosion. External surfaces have a grey durable powder coated finish. Suitable for vessel temperatures up to 70°C and flowing temperatures up to 120°C , resistant to ethylene or propylene glycol mixtures and has low gas permeability.

Altecnic expansion vessels are all tested according to the Pressure Systems Directive.

This download contains

1 Mechanical Equipment Family with twenty five types;

from 8 litre up to 1000 litre

COBie and NBSCreate Parameters

Altecnic BIM Userguide

Why not leave a Review

This is your chance to have your say. Have you enjoyed using this component. Let us know!

If you have any issues with this object you can let us know here and we will do our best to resolve the issue for you.

Other peoples comments